$0.00 USD
Standard Features:
The X1 weighs between 345 - 397 lbs. depending on truck model. Find weights by model here: Camper Weights
The X1 Camper is fabricated using the same tried-and-true methods used for over 100 years to engineer and fabricate commercial and military airplanes. Laser-cut sheet aluminum, fastened with solid aircraft rivets. Airplanes undergo extreme amounts of stress and vibration, making rivets a perfect solution that stands up over time.
There's easier ways to make a truck camper frame, but in our opinion there's none better.
No other truck camper is built like this, making the foundation of the X1 the lightest, strongest canopy fuselage on Earth.
You can watch a video on our YouTube channel here.
Yes! The canopy doors use a single handle that can be easily locked, unlocked and opened from the inside, without needing to use the key.
Yes! The roof of the X1's clamshell has universal t-slots allowing you to mount solar panels to the roof of the camper without needing to drill anything.
The cabside of the camper has 2 pre-drilled holes that can be used to route solar wiring (or other wiring) from the exterior of the camper to the internal wire chases.
Yes! Most common 270° awnings* work great with the X1's universal t-slots and our Universal Awning Brackets.
We recommend using 3 of our awning brackets for the most secure installation.
*We do not support the AluCab Shadow Awning due to the excessive weight it places at the rear of the camper.
Yes. We design our fitments to account for proper clearance above OEM antennas on all truck models.
For the Ford Ranger we recommend replacing your stock antennae with a shorter after-market antennae, like this.
Yes! The sleeping area and tent can be accessed either via the interior of the truck bed, or from any of the 3 tent doors using your own ladder. Ladder brackets can be mounted to the extrusion of the clamshell.
Yes! Financing is available through United Midwest Savings Bank, including 6 and 12 Month 0% APR options, for qualified buyers.
CloudCap™ is a new category of pop-tops for vans. It combines the added sleeping space of an integrated pop-top tent with the modularity of a gear mounting roof rack. It's fully integrated into your van with internal pass-through and internally operating latch.
Internal Access: Rooftop tents are designed to be accessed from the outside of your van. You have to climb an exterior ladder to the top of your van, unlatch and open your tent and shimmy in, all from the outside of your van. No matter what the weather is like.
• More Space: CloudCap™ is 112" inches long, making it significantly larger than most standard rooftop tents.
• Simple Setup & Takedown: pop-up and take down happens from the inside of your van. No without ever having to step outside your van, if the weather turns south.
• Vent Fan Compatible: In addition to our passive FlowState vents, popular vent fans (like MaxxAir for example) can be installed to keep the fresh air flowing.
• Walkable Roof: unlike rooftop tents, CloudCap's durable roof is capable of supporting a person standing and walking on it, up to 300 lbs.
• Gear Mounting: CloudCap™ offers more universal t-slots than any rooftop tent on the market. This means you're free to mount any accessory you can imagine.
• Premium Engineering: CNC-machined billet aluminum hardware, UV stable anodizing, premium durable powdercoating. CloudCap isn't a toy
• American-made: CloudCap™ is manufactured and assembled in the USA. No cheap filler, no shortcuts.
Fiberglass pop-tops have been around for years (think Westfalia) and are primarily designed for RV style camping. They offer additional sleeping space on your van's roof, but otherwise severely limit your ability to add more adventure-minded accessories to your van's roof, without a custom solution (Lightbars, awnings, solar panels, cross-bars, Starlink mounts, etc.).
• Walkable Roof: Unlike most fiberglass pop-tops, CloudCap's honeycomb composite roof is capable of supporting a person standing and walking on it, up to 300 lbs.
• Gear Mounting: CloudCap™ is made of universal t-slots than any rooftop tent on the market. This means you're free to mount any accessory you can imagine.
• Premium Engineering: CNC-machined billet allumnium hardware, UV stable anodizing, premium durable powdercoating. CloudCap isn't a tohy
• American-made: CloudCap™ is manufactured and assembled in the USA. No cheap filler, no shortcuts.
• Simple, Non-Structural Installation: Most fiberglass pop-tops require the entire roof of your van's roof (including structural members) to be cut and removed to install the pop-top. It requires substantial support to be installed, and takes days to complete. CloudCap installation is designed to be simple and minimally invasive to your van's structure. uses simple mounting brackets mounted don't effect the structural integrity of your van. Installation usually takes 4-5 hours to complete.
No. CloudCap has multiple universal t-slots integrated into the exterior perimeter and along the roof, allowing you to mount all the same common accessories you would normally mount to a roof rack, making an additional roof rack unnecessary.
Yes. CloudCap was designed to operate from the inside of your van. Lock it and unlock it, pop it up and take it down, all from the inside of your vehicle.
Yes. CloudCap's roof is designed to be walked on. Using 1/2" honeycomb composite panels, it's capable of supporting a person standing and walking on it, up to 300 lbs.
Perfect for strapping down gear or just taking in the elevated views.
Yes. you can mount awnings to CloudCap for additional shade and rain cover. Our universal awning brackets mount directly to CloudCap's integrated t-slots, and your awning attaches directly to the brackets. Simple, solid, and non-invasive.
The Fiamma F45S awning is a popular choice.
Yes. Light bars are a popular adventure van accessory that dramatically increases nighttime visibility and adds that badass, rugged look you're after.
You can easily mount light bars to CloudCap's integrated t-slots.
Yes. CloudCap makes it easy to add a solar panels to your van's roof, with enough space to accomodate up to 630 W of panels.
Yes. CloudCap can support the popular Maxxair fan in the roof, for maximum ventilation.
By installing it over the pass-through hole in the roof, it still ventilates your van when CloudCap is closed.
Yes. CloudCap is designed to withstand all year weather conditions.
• Marine-Grade Tent: The tent is made with marine-grade, acrylic-coated polyester, designed to live in the wet, rainy conditions.
• FlowState™ Vents: Condensation is always a challenge in wet or cold conditions.
• Vent Fan Compatible: For additional air flow you can add a powered vent fan to keep the fresh air flowing.
• ThermaPuff™ Insulation: Keep toasty in the coldest conditions with "a puffy coat for your tent™".
We currently support:
• Mercedes Sprinter | 144" & 170" Wheelbase
• Ford Transit |
CloudCap™ is sold through certified Super Pacific dealers nationwide.
To become a dealer or to find a dealer near you contact Philip Kuroda at philip@superpacificusa.com
CloudCap™ is proudly designed and manufactured in Portland, Oregon.
Standard Features:
The X1 weighs between 345 - 397 lbs. depending on truck model. Find weights by model here: Camper Weights
The X1 Camper is fabricated using the same tried-and-true methods used for over 100 years to engineer and fabricate commercial and military airplanes. Laser-cut sheet aluminum, fastened with solid aircraft rivets. Airplanes undergo extreme amounts of stress and vibration, making rivets a perfect solution that stands up over time.
There's easier ways to make a truck camper frame, but in our opinion there's none better.
No other truck camper is built like this, making the foundation of the X1 the lightest, strongest canopy fuselage on Earth.
You can watch a video on our YouTube channel here.
Yes! The canopy doors use a single handle that can be easily locked, unlocked and opened from the inside, without needing to use the key.
Yes! The roof of the X1's clamshell has universal t-slots allowing you to mount solar panels to the roof of the camper without needing to drill anything.
The cabside of the camper has 2 pre-drilled holes that can be used to route solar wiring (or other wiring) from the exterior of the camper to the internal wire chases.
Yes! Most common 270° awnings* work great with the X1's universal t-slots and our Universal Awning Brackets.
We recommend using 3 of our awning brackets for the most secure installation.
*We do not support the AluCab Shadow Awning due to the excessive weight it places at the rear of the camper.
Yes. We design our fitments to account for proper clearance above OEM antennas on all truck models.
For the Ford Ranger we recommend replacing your stock antennae with a shorter after-market antennae, like this.
Yes! The sleeping area and tent can be accessed either via the interior of the truck bed, or from any of the 3 tent doors using your own ladder. Ladder brackets can be mounted to the extrusion of the clamshell.
Yes! Financing is available through United Midwest Savings Bank, including 6 and 12 Month 0% APR options, for qualified buyers.
CloudCap™ is a new category of pop-tops for vans. It combines the added sleeping space of an integrated pop-top tent with the modularity of a gear mounting roof rack. It's fully integrated into your van with internal pass-through and internally operating latch.
Internal Access: Rooftop tents are designed to be accessed from the outside of your van. You have to climb an exterior ladder to the top of your van, unlatch and open your tent and shimmy in, all from the outside of your van. No matter what the weather is like.
• More Space: CloudCap™ is 112" inches long, making it significantly larger than most standard rooftop tents.
• Simple Setup & Takedown: pop-up and take down happens from the inside of your van. No without ever having to step outside your van, if the weather turns south.
• Vent Fan Compatible: In addition to our passive FlowState vents, popular vent fans (like MaxxAir for example) can be installed to keep the fresh air flowing.
• Walkable Roof: unlike rooftop tents, CloudCap's durable roof is capable of supporting a person standing and walking on it, up to 300 lbs.
• Gear Mounting: CloudCap™ offers more universal t-slots than any rooftop tent on the market. This means you're free to mount any accessory you can imagine.
• Premium Engineering: CNC-machined billet aluminum hardware, UV stable anodizing, premium durable powdercoating. CloudCap isn't a toy
• American-made: CloudCap™ is manufactured and assembled in the USA. No cheap filler, no shortcuts.
Fiberglass pop-tops have been around for years (think Westfalia) and are primarily designed for RV style camping. They offer additional sleeping space on your van's roof, but otherwise severely limit your ability to add more adventure-minded accessories to your van's roof, without a custom solution (Lightbars, awnings, solar panels, cross-bars, Starlink mounts, etc.).
• Walkable Roof: Unlike most fiberglass pop-tops, CloudCap's honeycomb composite roof is capable of supporting a person standing and walking on it, up to 300 lbs.
• Gear Mounting: CloudCap™ is made of universal t-slots than any rooftop tent on the market. This means you're free to mount any accessory you can imagine.
• Premium Engineering: CNC-machined billet allumnium hardware, UV stable anodizing, premium durable powdercoating. CloudCap isn't a tohy
• American-made: CloudCap™ is manufactured and assembled in the USA. No cheap filler, no shortcuts.
• Simple, Non-Structural Installation: Most fiberglass pop-tops require the entire roof of your van's roof (including structural members) to be cut and removed to install the pop-top. It requires substantial support to be installed, and takes days to complete. CloudCap installation is designed to be simple and minimally invasive to your van's structure. uses simple mounting brackets mounted don't effect the structural integrity of your van. Installation usually takes 4-5 hours to complete.
No. CloudCap has multiple universal t-slots integrated into the exterior perimeter and along the roof, allowing you to mount all the same common accessories you would normally mount to a roof rack, making an additional roof rack unnecessary.
Yes. CloudCap was designed to operate from the inside of your van. Lock it and unlock it, pop it up and take it down, all from the inside of your vehicle.
Yes. CloudCap's roof is designed to be walked on. Using 1/2" honeycomb composite panels, it's capable of supporting a person standing and walking on it, up to 300 lbs.
Perfect for strapping down gear or just taking in the elevated views.
Yes. you can mount awnings to CloudCap for additional shade and rain cover. Our universal awning brackets mount directly to CloudCap's integrated t-slots, and your awning attaches directly to the brackets. Simple, solid, and non-invasive.
The Fiamma F45S awning is a popular choice.
Yes. Light bars are a popular adventure van accessory that dramatically increases nighttime visibility and adds that badass, rugged look you're after.
You can easily mount light bars to CloudCap's integrated t-slots.
Yes. CloudCap makes it easy to add a solar panels to your van's roof, with enough space to accomodate up to 630 W of panels.
Yes. CloudCap can support the popular Maxxair fan in the roof, for maximum ventilation.
By installing it over the pass-through hole in the roof, it still ventilates your van when CloudCap is closed.
Yes. CloudCap is designed to withstand all year weather conditions.
• Marine-Grade Tent: The tent is made with marine-grade, acrylic-coated polyester, designed to live in the wet, rainy conditions.
• FlowState™ Vents: Condensation is always a challenge in wet or cold conditions.
• Vent Fan Compatible: For additional air flow you can add a powered vent fan to keep the fresh air flowing.
• ThermaPuff™ Insulation: Keep toasty in the coldest conditions with "a puffy coat for your tent™".
We currently support:
• Mercedes Sprinter | 144" & 170" Wheelbase
• Ford Transit |
CloudCap™ is sold through certified Super Pacific dealers nationwide.
To become a dealer or to find a dealer near you contact Philip Kuroda at philip@superpacificusa.com
CloudCap™ is proudly designed and manufactured in Portland, Oregon.
